What Steps Should Be Included in Gun Cleaning?

Cleaning and maintaining guns is very important to keep guns functioning properly and extend their life. However, if there are no correct steps and cleaning techniques, it may damage the gun and cause more harm than good. So what steps should we follow to clean the gun?

Before we start cleaning the gun, we need to prepare the appropriate gun cleaning tools and materials. Commonly used gun cleaning tools include buttstocks, brushes, cotton yarn, cleaners, gun oil, etc. If you don't want to spend time buying and collecting these tools one by one, you can also directly choose our gun cleaning kit, which is in place in one step.

With the tools, we also need to put the gun in a safe state of operation. First, we need to remove the gun, make sure there are no bullets in the magazine, and store the magazine and the gun chamber separately. Secondly, we need to find a safe place to clean the gun and make sure no one else is nearby to avoid accidents.

Cleaning the gun chamber is the most important step in the gun cleaning process. We can use a brush and cotton yarn to clean the gun chamber. Pour the cleaner on the brush, insert the brush into the gun chamber, and brush back and forth to remove dust and dirt from the gun chamber. Next, wipe the gun barrel with cotton yarn to wipe off the remaining detergent and dirt. Then further clean the bolt, brush the parts inside the bolt with a brush with detergent, and repeat the cotton yarn wiping and cleaning steps.

After cleaning the gun barrel and bolt, you can use cotton yarn to oil the gun and do gun maintenance. The amount of gun oil does not need to be too much, just a small amount, and apply it to the metal part of the gun with cotton yarn. After completing the cleaning and lubrication, assemble the gun normally.